Tektronix AD007 Bedienungsanleitung PDF herunterladen (Seite 30)

Getting Started

AD007 User Manual

5. When the LAN-Link indicator turns from red to off, the AD007

adapter has successfully loaded the IP address:

GPIB LAN LAN-Link POWER

Off Off Off Green

NOTE. If your Internet web browser is configured to use the dialup

adapter, go into the Internet configuration dialog and change the

browser to use the local network. For more information, refer to the

documentation for your particular system.

6. In Windows, open the Net work Properties window by right-click-

ing on the Network icon in the Control Panel. (In Windows NT,

select the Protocols tab.)

7. If TCP/IP is not listed as one of the protocols, you must install it

from the Windows installation CD-ROM disc.

8. Highlight the TCP/IP and click on Properties. This opens the

TCP/IP properties dialog box.

9. Click on all the tabs and write down all the settings. This allows

you to restore them l ater if nece ssary.

10. Set the IP address of the PC to work with the currently configured

settings of the adapter, or use the following settings that will

work with the factory default settings of the AD007 adapter. (You

mayhavetoclickonSpecifyanIPaddress.)

a. Assign the PC an IP address with the first three numbers

that are t he sam e as the current AD007 IP address. (For

example, the IP address 192. 168.1.2 is acceptable if you

are using the factory default 192.168.1.1 address of the

adapter).

b. Assign the numbers for the subnet mask. (For example,

assign the subnet mask 255.255.255.0 if you are using the

factory default settings).

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 87 88

Keine Kommentare

Tektronix AD007 Bedienungsanleitung Seite 30