Tektronix K1297-G20 Bedienungsanleitung PDF herunterladen (Seite 187)

Appendix D: Windows XPe Troubleshooting

K1297-G20 Monitor User Manual

E-9

Repair the K1297 by Recovery Disk. To repair the K1297 by the recovery disk,

proceed as follows:

CAUTION. Make sure that the protocol tester and the external CD-RW drive

are both powered off!

1. Attach the SCSI cable of the CD-RW drive to the SCSI I/O BUS

connector of the instrument. The SCSI connector is located on the front

of the K1297 compact and on the rear of the K1297.

2. Turn on the CD-RW drive .

3. Insert the CD ROM labeled “K1297, Recovery CD (Build XPe)” into

the CD-RW drive.

4. Switch on the device. Press <Del>, when the initial BIOS screen

appears. This opens the BIOS Setup dialog.

5. Use the arrow keys to select the option “BIOS FEATURES SETUP”

and press <Enter>.

6. In the dialog that opens, verify the settings of the “Boot Sequence”

option. If the sequence A,C,SCSI is currently not selected, change it

using the <PgUp> / <PgDn> keys.

7. Press <ESC> to return to the previous dialog.

8. Press <F10> to “SAVE & EXIT SETUP”.

1 2 ... 182 183 184 185 186 187 188 189 190 191 192 ... 197 198

Keine Kommentare

Tektronix K1297-G20 Bedienungsanleitung Seite 187