Tektronix AD007 Bedienungsanleitung PDF herunterladen (Seite 26)

Getting Started

AD007 User Manual

A Note on Configuring the Network

To establish communications with the AD007 GPIB-LAN Adapter

over the Ethernet, the network administrator must perform the

following tasks:

H Identify the Etherne t hardwa re a ddress of the adapter

H Assign an IP address, subnet mask, default router for the adapter

on the network

H Configure the DHCP or BOOTP server

NOTE. A network technician should determine the network subnet

that the AD007 adapter connects to. (This is the connection point for

the RJ-45 cable.) It is not unusual for several drops at a particular

location to be on different network subnets, so it is important to have

the one that is designated for the adapter.

At power on, the AD007 adapter performs a self test and initiates

DHCP/BOOTP. The DHCP/BOOTP server then communicates with

the AD007 adapter to give it the proper network settings. For more

information about setting up a DHCP/BOOTP server, see page 8.

If there is no DHCP/BOOTP server, you can use the re set button to

bypass the DHCP/BOOTP request and manually set the network

parameters.

For more detailed information about the a pplic able net work

protocols, see Appe ndix C: Network Protocols on page 61.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 87 88

Keine Kommentare

Tektronix AD007 Bedienungsanleitung Seite 26