Tektronix MTM400 Bedienungsanleitung PDF herunterladen (Seite 162)

Interface Configuration and Interpretation

3-118 MTM400 MPEG Transport Stream Monitor User Manual

QAM (Annex B II)

The QAM (Annex B II) Settings dialog box is shown in Figure 3-42.

Configuration - QAM (Annex B II)

Figure 3-42: Interface configuration – QAM Annex B II

For each of the settings, enter the required change and select Set to apply the new

value. The settings are as follows:

NOTE. These settings can also be made from the Input Card screen.

Configurations: The QAM Settings dialog provides an option to recall a number

of settings configuration files. The configuration files are created

and stored in the MTM400. To select a configuration file,

highlight the required name in the list.

Tuner Frequency (kHz):

This value, set in kHz units, is the center frequency of the

channel to be received. Any frequency can be entered. There is

no need to follow a channel plan. The frequency resolution is

determined by the tuner step size of 62.5 kHz.

1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 196 197

Keine Kommentare

Tektronix MTM400 Bedienungsanleitung Seite 162