Tektronix AFG3000 Bedienungsanleitung PDF herunterladen (Seite 126)

Syntax and Commands

3-52 AFG3000 Series Arbitrary/Function Generators Reference Manual

[SOURce[1|2]]:FREQuency:MODE

This command sets or queries the frequency sweep state. You can select sine,

square, ramp, or arbitrary waveform for sweep. The arbitrary/function generator

automatically changes to the Continuous mode if any waveform is selected other

than sine, square, ramp, or an arbitrary waveform.

Group

Source

Related Commands

[SOURce[1|2]]:FREQuency[:CW|:FIXed]

[SOURce[1|2]]:FREQuency:CENTer

[SOURce[1|2]]:FREQuency:SPAN

[SOURce[1|2]]:FREQuency:STARt

[SOURce[1|2]]:FREQuency:STOP

Syntax

[SOURce[1|2]]:FREQuency:MODE {CW|FIXed|SWEep}

[SOURce[1|2]]:FREQuency:MODE?

Arguments

CW|FIXed means that the frequency is controlled by the

[SOURce[1|2]]:FREQuency[:CW|:FIXed] command. The sweep is invalid.

SWEep means that the output frequency is controlled by the sweep command set.

The sweep is valid.

Returns

CW|FIXed|SWEep

Examples

SOURce1:FREQuency:MODE SWEep

specifies the sweep command set for controlling the CH 1 output frequency.

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 229 230

Keine Kommentare

Tektronix AFG3000 Bedienungsanleitung Seite 126